STRIDER®
EXPLORE THE MOUNTAIN

STRIDER® PRO 130 DYN

STRIDE UPHILL. RIP DOWNHILL.
WITH THE ULTIMATE HIGH-PERFORMANCE HIKE & SKI BOOT FROM NORDICA

strider-award

DESIGNED TO BE LIGHT,WARM AND COMFORTABLE..

ENGINEERED TO OUTPERFORM..

Our all-new Strider hike and ski boots are specially made for men and women skiers who’d rather ski new lines than stand around and wait in old ones. With their lightweight, modern design and 100mm last, they fit most feet right out of the box. Makes it easier to hike uphill without compromising downhill skiing performance.

strider-main-image
NORDICA TRI-FIT CUSTOMIZATION
NEW LACED 3D LIGHT CORK LINER WITH PRIMALOFT®
NEW HIKE MECHANISM
NEW LIGHTWEIGHT CUFF TRI FORCE CONSTRUCTION
NEW LIGHTWEIGHT BUCKLES CONSTRUCTION & DESIGN
DYNAFIT® INSERTS (PRO DYN)
HIGH TRACTION SOLES + GRIPWALK® KIT READY
LIGHTWEIGHT MESH POWER STRAP
WATERPROOF WEATHER SHIELD
MICHELIN® RUBBER TECHNICAL SOLES
1

NORDICA TRI-FIT CUSTOMIZATION

INFRARED-READY SHELL + CORK FIT LINER + SCREW-IN COMPONENTS = 100% CUSTOMIZABLE SKI BOOT
  • Ultra-light, infrared-ready shell can be expanded from 100mm to 104mm in as little as 10 minutes (6 min. heating, 3 min. suction, 1 min. to wear the boot). No cooling required. No risk of overheating or melting the shell.
  • Custom Cork Fit Liner, inspired by our Speedmachine, moulds itself around the heel and ankle for a more precise and comfortable performance fit. Can be heated (repeatedly) to achieve a faster, perfect fit in just 8 minutes Nordica oven 80 °C/176°F).
  • All major components, including buckles, power straps, toe and heel inserts and cuffs can be removed, replaced or retrofitted using a screwdriver and spanner.
strider-point1-img2
strider-point1-img
2

NEW LACED 3D LIGHT CORK LINER WITH PRIMALOFT

  • Inspired by our Speedmachine boots.
  • Accordion-like folds promote fore/aft movement.
  • Weight-saving vents promote mobility in hike mode.
  • Moulds itself to perfectly match the contours of the ankle and heel for a snugger, more precise fit.
  • Can be heated (repeatedly) to achieve a faster, perfect fit in just 8 minutes.
  • Primaloft® is the warmest insulation known to man and woman.
  • Unlike down, it keeps feet toasty warm and dry even when it’s wet.
strider-point2-img
3

NEW HIKE MECHANISM

  • Ultra-light cuff construction saves precious weight without sacrificing vital steering power and strength.
  • Locked down, it delivers direct energy to the skis for that legendary Nordica downhill skiing performance. .
  • Opened, it promotes exceptional forward flex and facilitates hiking.
strider-point2-img
4

NEW LIGHTWEIGHT CUFF TRI FORCE CONSTRUCTION

  • Three different types of plastic combine to deliver maximum comfort, performance and ease of use.
  • New lightweight Triax cuff is 20% lighter than one made of PU.
  • Super stiff sole and spine transmit energy precisely and directly to the skis.
  • Softer shell and cuff wrap comfortably around the foot and lower leg for a snugger, comfier & more precise fit.
  • Super soft entry & exit flaps.
  • A size 26.5 (305mm) Strider weighs 200 grams less than a comparable Speedmachine.
strider-point4-img
5

NEW LIGHTWEIGHT BUCKLES CONSTRUCTION & DESIGN

  • Each buckle weighs 37.5 gr. vs 53.0 gr. for a conventional buckle.
  • All-new wire bail further reduces weight while closing the boot, snugly and firmly in place.
strider-point5-img
6

DYNAFIT® INSERTS (PRO DYN)

  • Standard equipment on the Strider Pro 130 Dyn and Strider 120 Dyn.
  • Available as an after-sale kit for the Strider 110.
  • Compatible with ultra-light Dynafit Tour bindings..
7

HIGH TRACTION SOLES + GRIPWALK® KIT READY

  • Gripwalk soles mounted as standard equipment on models Strider Pro 130 Dyn and Strider 120 Dyn.
  • Strider 110 (no Dyn) mounted with ISO 5355 Alpine soles.
  • Available kit only for Strider Pro 130 Dyn and 120 Dyn 08A04500 Strider PU alpine soles (5355).
  • For Strider 110 Gripwalk kit code 08A04300.
strider-point7.img
8

LIGHTWEIGHT MESH POWER STRAP

  • Unique mesh construction with weight-saving cut-outs.
  • Beefy, 45mm width enhances shin contact, for a snugger fit and more precise and direct steering control.
strider-point8.img
9

WATERPROOF WEATHER SHIELD

  • Locks out the wet and cold, keeps feet dry and warm.
10

MICHELIN® RUBBER TECHNICAL SOLES

Building a hiking boot that hikes as well as a Nordica ski boot skis wasn’t easy, which is why we invited Michelin to design, develop and construct a revolutionary new sole for our Strider family of hike and ski boots. The result is a fully integrated toe, arch and heel system that delivers matchless adherence and traction on snow, ice and almost any obstacle skiers are likely to meet in the face of adventure.

strider-point10.img

BENEFITS::

  • GRIP AND TRACTION ON ICY TERRAIN
  • STABILITY & LATERAL CONTROL
  • DURABILITY & WEAR RESISTANCE
strider-point10.img

THE 1ST 100MM, HIGH-PERFORMANCE

ALL-MOUNTAIN SKI BOOT WITH A

MICHELIN ® GRIPWALK ® SOLE

The new, fully integrated GripWalk toe and heel system provides matchless Michelin® traction on snow, ice and almost any other surface skiers might encounter when they ski the whole mountain.

FROM MICHELIN ® TIRES TO NORDICA GRIPWALK ® SOLES

  1. ASYMMETRIC TREAD
  2. WATER-RESISTANT, TOE SPECIFIC DESIGN
  3. SPECIFIC TREAD DESIGN FOR STABILITY AND ADAPTABILITY
  4. SIPED SCULPTURES FOR LATERAL SUPPORT AND ADHERENCE
  5. SMALL RADIUS ON EDGE AND BASE FOR ENHANCED RACE LOOK
  6. HIGH CONTACT SURFACE
  7. GROOVES FOR SNOW AND WATER EVACUATION
  8. MASSIVE HEEL SCULPTURES INCREASE DURABILITY
  9. PREMOUNTED GRIPWALK® HIGH TRACTION SOLES; ISO 5355 ALPINE NORM KIT AVAILABLE IN THE BOX
"Become a Nordican and connect with us"